iDatalink's HRN-RR-HO1
wiring adapterGENERAL FEATURES:
iDatalink's HRN-RR-HO1 wiring adapter works in conjunction with iDatalink's Maestro ADS-MRR module, allowing you to connect a new car stereo in select 2006-2011 Honda-made vehicles. If you're buying a compatible iDatalink-ready car stereo, you'll enjoy the outstanding performance of your receiver, plus seamless touchscreen control over most of the factory features in select Honda-built vehicles, including the use of your steering wheel audio controls, Bluetooth®, auxiliary input, and factory amp. You'll also appreciate the additional features added by the adapter, including the ability to view performance gauges and other vehicle information on your radio's screen.Honda/Acura Harness: The iDatalink Maestro HRN-RR-HO1 installation harness greatly simplifies the installation of the Maestro RR Car Radio Replacement Interface module (ADS-MRR sold separately) in select Honda & Acura vehicles when replacing your factory radio with an iDatalink Serial Port compatible head unit or other aftermarket head unit from Kenwood, JVC, Alpine or Pioneer; or other aftermarket head unit.
Retained Features: The following factory features (if applicable) are retained from Kenwood, JVC, Alpine, JVC, or Pioneer using the Maestro RR Car Radio Replacement Interface module and HRN-RR-HO1 installation harness.
Factory Amplifier
Aux Input
Bluetooth
Steering Wheel Controls
Note: When installing an aftermarket head unit without the iDatalink Serial Port, only steering wheel control & amplifier turn-on are retained.Connections: The iDatalink Maestro HRN-RR-HO1 installation harness contains five Molex connectors which plug into your factory radio harness. On the other end of the harness are four multi-pin connectors which plug into the Maestro RR Car Radio Replacement Interface module (ADS-MRR sold separately). In addition, you will need to hardwire the power/ground, illumination, speaker, and navigation output leads of the HRN-RR-HO1 harness to your aftermarket head unit's wiring harness. There are also stereo RCA connectors to plug into your aftermarket head unit's rear-panel Aux input. In addition, stereo RCA connectors connect to your aftermarket head unit's front, rear, and sub pre-outs.
Note: When using the HRN-RR-HO1 installation harness, you will not use the additional harnesses that are included with the Maestro RR Car Radio Replacement Interface module (ADS-MRR sold separately).
Extra Features: The following Extra features are added when replacing your aftermarket head unit with a compatible iDatalink Serial Port head unit from Kenwood, JVC, Pioneer, or Alpine using the Maestro RR Car Radio Replacement Interface module and HRN-RR-HO1 installation harness.
Performances Gauges (user selectable)
Vehicle Information (Tire Pressure, Battery Voltage, Door Open, & Check Engine Codes)
top of page
SKU: 172782454258
$48.88Price
bottom of page