HARLEY STREET GLIDE SPEAKER / AMP KIT
GENERAL FEATURES:
Extreme Level Harley Davidson Street Glide Stereo System Upgrade.
This kit comes loaded with the main parts you need to upgrade your '14 & up Street Glide. This is absolute top level gear and it's all plug and play with the factory radio. 
Extreme Output & the Best Sound Quality
Loud Harley Davidson Street Glide Speakers

Step into the top level of pro audio Street Glide speakers. This kit comes with everything, Diamond Audio MO75T horns and MSPRO65 mid woofers to your '14 & up Street Glide. This is a whole new level of loud that simply has not been possible up until now. 
 
Easy Installation Harley Speakers
 
We include several parts in this kit that make installation a snap. Included is a quick disconnect harnesses for each of the horns and crossovers. The included speaker grills snap right in place of the original factory grills. Each horn comes with a CNC machined HDPE back plate. All fasteners are stainless steel. The woofers are plug and play with the factory Harley speaker wiring. 
IP65 Marine Grade Speakers
Waterproof Harley Davidson Street Glide Speakers

These speakers are designed to take all of the weather that you can throw at them. They are treated for extreme UV exposure, extreme swings in temperature, high vibration, and water.  

Included in This Kit
800 Watt Diamond Audio HXM800.4D 4 channel amplifier
6.5" Diamond Audio MSPRO65 pro audio woofers
Dual stage Diamond Audio MO75T compression horn tweeters 
Stamped steel, powder coated Street Glide speaker grills with horn provisions
Stainless steel mounting hardware (see Installation Note to the right)
Neoprene speaker gasket
CNC machined HDPE horn mounting rings 
Pre-wired OFC tweeter extensions with serviceable quick disconnects
-------------------
Diamond Audio HXM800.4D 800W RMS 4 Channel Amplifier
4 Channel Harley Amplifier Diamond Audio HXM800.4D
GENERAL FEATURES:
This is our favorite amplifier for high power Harley systems. With 800 watts of power and 4 channels of output this amplifier can be dedicated to just the fairing speakers so that the horns have their own level adjustment or it can be configured to run both the fairing speakers as well as rear speakers. In either configuration there is more than enough power on tap to reach well into insane output levels. 
This amplifier is very different from other amplifiers that claim the same type of power levels. The HXM800.4D has a lower noise floor, balanced inputs, and a much more refined internal power supply that is friendly to your bikes charging system and keeps high frequency distortion away from the speakers that we so commonly see in other amplifiers on the market. 
Installation Note: This amplifier fits perfectly under the radio and above the headlight using the included amplifier mounting pad. The front two plastic tabs on the headlight must be trimmed off for clearance. These two tabs are there to hold the factory wire harness in place and are not structural in any way.
-------------------
Diamond Audio MO75t Horns Are the Best Sounding Horns out There.
GENERAL FEATURES:
We know because we had the opportunity to evaluate these horns with Diamond's staff during the design phase. We auditioned all of the popular horns on the market alongside these and nothing else compares. The dual stage horn flare, inverted neo magnet/diaphragm, and much more refined phase plug design outperforms other bullet style horns by leaps and bounds.  
Diamond Audio MSPRO65 Mid Woofers Are the Way to Go.
These woofers have a lot in common with other pro audio type woofers out there but they have a few tricks up their sleeve that is easy to miss if you don't know what you are looking at. They cone shape has a convex geometry that dramatically improves cone stiffness, efficiency (loudness per watt), and amplifies/smooths the high frequency response. Couple all of that with a 400 watt thermal spec and you get a wall of volume that simply sounds better than everything else out there. 
-------------------
12db Crossovers Add a Lot to Performance and Reliability
Most all horns on the market come with 6db caps for crossovers. Those type of crossovers have a lot of problems though. The sound of a horn using just a cap changes dramatically with volume, making it impossible to tune your system to sound equally as good at high volume as lower volumes. The crossovers included in this kit though are 12db crossovers with a much higher power handling and a much more stable output at all volume levels. 
Installation Notes: The factory fairing speaker pods must be modified slightly using a heat gun in order to make clearance for the woofer magnet inside the pod. This is a very simple procedure. Heat the pod where the magnet makes contact until the plastic is soft and then simply screw the speaker in place. 
 
Specifications - Woofers
Power Rating: 200 W RMS/ 400 MAX
Sensitivity: 97dB 1W/1M
Frequency Response: 110Hz-10k Hz+/-3dB
Nominal Impedance: 4 ohm
Mounting Depth: 2.375"
Cut-out Diameter: 5.625"
Over-all Diameter: 6.5"
Over-all Height: 2.5625"
 
Specifications - Compression Horn Tweeters
Overall Diameter 2.28"
Cut Out Diameter 1.61"
Over All Depth 2.0"
Mounting Depth 1.12"
Sensitivity  106 db 1W/1M
Frequency Response 2k - 20k
Nominal Impedance 4 Ohm
Power Handling 
50W RMS / 100W Max
 
Included Crossover 
12db
 
Rebuildable Diaphragm  
Yes
 
This item IS IN STOCK