HARLEY ROAD GLIDE SPEAKER / AMP KIT
Full Extreme Level Harley Davidson Road Glide Stereo System Upgrade.
This kit comes loaded with the main parts you need to upgrade your '15 & up Road Glide. This is absolute top level gear.
Extreme Output & the Best Sound Quality
Loud Harley Davidson Road Glide Speakers
Step into the top level of pro audio Road Glide speakers. This kit includes everything, Diamond Audio MO75T horns and MSPRO65 mid woofers for your '15 & up Road Glide. This is a whole new level of loud that simply has not been possible up until now.
Easy Installation Harley Speakers
We include several parts in this kit that make installation a snap. Included is a quick disconnect harnesses for each of the horns and crossovers. The included speaker grills snap right in place of the original factory grills. Each horn comes with a CNC machined HDPE back plate. All fasteners are stainless steel. The woofers are plug and play with the factory Harley speaker wiring.
IP65 Marine Grade Speakers
Waterproof Harley Davidson Road Glide Speakers
These speakers are designed to take all of the weather that you can throw at them. They are treated for extreme UV exposure, extreme swings in temperature, high vibration, and water.
Included in This Kit
1200 Watt SounDigital 4 channel amplifier 1200.4EVOX -4Ω
6.5" Diamond Audio MSPRO65 pro audio woofers
Dual stage Diamond Audio MO75T compression horn tweeters
Stamped steel, powder coated Road Glide speaker grills with horn provisions
Stainless steel mounting hardware (see Installation Note to the right)
CNC machined HDPE horn mounting rings
Pre-wired OFC tweeter extensions
The Magic Compression Horns
ADDITIONAL ITEMS MAY BE NECESSARY FOR INSTALLATION (SEE ADITIONAL ITEMS TO THE RIGHT)
SOUNDIGITAL 1200.4 EVOX -4
1200 WATTS / 300 WATTS X 4
The EVO X Line brings the latest technology in a compact design with the highest quality components. From a pioneering technology, SounDigital brought to car audio amplifiers something that had not been explored yet. The thermal coupling through RTGP system.
The exclusive RTGP system (Thermal Recovery for power generation) assures SounDigital products both greater thermal efficiency and robustness with higher stability.
1200.4 EVOX – 4Ω
Power @ 12.6V @ 4Ω: 4 X 198 WRMS
Power @ 12.6V @ 2Ω: 4 X 300 WRMS
Power @ 12.6V @ 1Ω: N/A
Bridge Power @ 12.6V @ 4Ω: 2 X 600 WRMS
Bridge Power @ 12.6V @ 2Ω: N/A
Power @ 14.4V @ 4Ω: 4 X 221 WRMS
Power @ 14.4V @ 2Ω: 4 X 335 WRMS
Power @ 14.4V @ 1Ω: N/A
Bridge Power @ 14.4V @ 4Ω: 2 X 669 WRMS
Bridge Power @ 14.4V @ 2Ω: N/A
Operating Voltage: 8V – 16V
Current Draw (Music): 58 A
Current Draw (Max): 116 A
Recommended Fuse (Music): 60 A
Total Efficiency: 82%
Damping Factor: 200
Frequency Response (-3dB): 5Hz – 22kHz
Crossover HPF: 45Hz – 850Hz
Crossover LPF: 45Hz – 850Hz
THD + N (10% Rated Power): 0.1%
Product Dimensions: 7.1 x 5.4 x 2.2 in
Product Dimensions: 18.1 x 13.6 x 5.5 cm
Diamond Audio MO75t Horns Are the Best Sounding Horns out There.
We know because we had the opportunity to evaluate these horns with Diamond's staff during the design phase. We auditioned all of the popular horns on the market alongside these and nothing else compares. The dual stage horn flare, inverted neo magnet/diaphragm, and much more refined phase plug design outperforms other bullet style horns by leaps and bounds.
Diamond Audio MSPRO65 Mid Woofers Are the Way to Go.
These woofers have a lot in common with other pro audio type woofers out there but they have a few tricks up their sleeve that is easy to miss if you don't know what you are looking at. They cone shape has a convex geometry that dramatically improves cone stiffness, efficiency (loudness per watt), and amplifies/smooths the high frequency response. Couple all of that with a 400 watt thermal spec and you get a wall of volume that simply sounds better than everything else out there.
12db Crossovers Add a Lot to Performance and Reliability
Most all horns on the market come with 6db caps for crossovers. Those type of crossovers have a lot of problems though. The sound of a horn using just a cap changes dramatically with volume, making it impossible to tune your system to sound equally as good at high volume as lower volumes. The crossovers included in this kit though are 12db crossovers with a much higher power handling and a much more stable output at all volume levels.
Installation Notes: The factory fairing speaker pods must be modified slightly using a heat gun in order to make clearance for the woofer magnet inside the pod. This is a very simple procedure. Heat the pod where the magnet makes contact until the plastic is soft and then simply screw the speaker in place.
Specifications - Woofers
Power Rating: 200 W RMS/ 400 MAX
Sensitivity: 97dB 1W/1M
Frequency Response: 110Hz-10k Hz+/-3dB
Nominal Impedance: 4 ohm
Mounting Depth: 2.375"
Cut-out Diameter: 5.625"
Over-all Diameter: 6.5"
Over-all Height: 2.5625"
Specifications - Compression Horn Tweeters
Overall Diameter 2.28"
Cut Out Diameter 1.61"
Over All Depth 2.0"
Mounting Depth 1.12"
Sensitivity 106 db 1W/1M
Frequency Response 2k - 20k
Nominal Impedance 4 Ohm
50W RMS / 100W Max
This item IS IN STOCK
HARLEY ROAD GLIDE SOUNDIGITAL 1200.4EVOX 4Ω AMP DIAMOND AUDIO PRO MSPRO65 MO75T
Some applications, such as the 15-UP Road Glide, require slight modification to the factory speaker enclosure to allow the magnet of the MSPRO65 speaker to fit.
One common way known to do this is to use a heat source such as a propane torch and heat up the enclosure in the area of the magnet and allow it to form as the speaker is pushed into place, although this method is successful 702 Motoring Las Vegas does not recommend this approach.
Our Position is this -
You are spending good money on purchasing High End Products to have your Bike Sounding the "BEST" NOT second best.
If using the heat up method you are using excessive pressure on the basket and speaker assembly to force the magnet of the speaker to form the enclosure, during this process unnecessary stress can and probably will distort the speaker and negatively effect the voice coil that has been Precision assembled.
When this occurs you have a Speaker that is not Happy. For example imagine getting into a small car, a car you barley fit into. You may fit, but you are not going to be happy. You are restricted, you may have trouble breathing, this is NOT how you want your Speaker to Feel. You want that Speaker Happy so it Creates a Level of Sound that puts a smile on your face every time you turn your system on and this is what Diamond Audio is Famous for.
Furthermore when using the heat method the moulded enclosure hardens against the magnet and will produce constant pressure on that magnet, the speaker will not sound as good as it could and can cause a unstable and now miss aligned voice coil to prematurely fail, more than likely right in the middle of a weekend cruise.
At 702 Motoring Las Vegas we share these small details with our customers, lessons we have learned that helps you get the most out of your system.
When you ride with Diamond Audio & 702 Motoring you are riding with a Sound Level others will Envy - When you are Happy you will share your buying experience with others and we appreciate that, nothing makes us happier than when we receive a phone call from a New Customer that you referred to us because they can not believe how good your bike sounded.
Provided are detailed pictures of completed modifications to the '15-UP Road Glide enclosures. Cut away a small portion of the enclosures to allow the magnet the room it needs, then screw the speaker into place. Next, simply put a little strip of sound deadening material over the open hole and you are done. For sound deadening material (CLICK HERE).
Many Harley's have a screw head size that is large, if your Harley has this type of screw we recommend NOT using them and pick up some small round head style screws as shown in the last picture. For appropriate screws (CLICK HERE).
Reason being that the large head screw is just that – too large. Using them will tear and rip the speakers surround. Again we want a Happy Speaker, the smaller head screw fits perfectly in the mounting hole of the speaker not effecting the surround. The speaker fits Perfectly!!! It Will Sound Awesome & You will be Smiling!!
IF YOU HAVE A FACTORY RADIO YOU WILL NEED THE ADDITIONAL PLUG & PLAY T-HARNESS ITEM # 234201551683 (CLICK HERE)
IF YOU HAVE A FACTORY RADIO YOU WILL NEED THE ADDITIONAL PLUG & PLAY RADIO TO SounDigital AMP ITEM # 234246840161 (CLICK HERE)
AMPLIFIER MOUNTING BRACKET ITEM # 192891435822 CLICK HERE)
SMALL ROUND HEAD STYLE SCREWS ITEM # 224735405135 (CLICK HERE)
SOUND DEADENING MATERIAL 10X12" SHEET ITEM # 324934012568 (CLICK HERE)