HARLEY ROAD GLIDE SPEAKER / AMP KIT
Full Plug and Play Extreme Level Harley Davidson Road Glide Stereo System Upgrade.
This kit comes loaded with the main parts you need to upgrade your '15 & up Road Glide. This is absolute top level gear and it's all plug and play with the factory radio.
Extreme Output & the Best Sound Quality
Loud Harley Davidson Road Glide Speakers
Step into the top level of pro audio Road Glide speakers. This kit includes everything, Diamond Audio MO75T horns and MSPRO65 mid woofers to your '15 & up Road Glide. This is a whole new level of loud that simply has not been possible up until now.
Easy Installation Harley Speakers
We include several parts in this kit that make installation a snap. Included is a quick disconnect harnesses for each of the horns and crossovers. The included speaker grills snap right in place of the original factory grills. Each horn comes with a CNC machined HDPE back plate. All fasteners are stainless steel. The woofers are plug and play with the factory Harley speaker wiring.
IP65 Marine Grade Speakers
Waterproof Harley Davidson Road Glide Speakers
These speakers are designed to take all of the weather that you can throw at them. They are treated for extreme UV exposure, extreme swings in temperature, high vibration, and water.
Included in This Kit
600 Watt Diamond Audio MICRO4V2 4 channel amplifier
6.5" Diamond Audio MSPRO65 pro audio woofers
Dual stage Diamond Audio MO75T compression horn tweeters
Stamped steel, powder coated Road Glide speaker grills with horn provisions
Stainless steel mounting hardware
Neoprene speaker gasket
CNC machined HDPE horn mounting rings
Pre-wired OFC tweeter extensions with serviceable quick disconnects
The Magic Compression Horns
IF YOU HAVE A FACTORY RADIO YOU WILL NEED THE ADDITIONAL PLUG & PLAY PART# 14FPNP (CLICK HERE)
600 WRMS 4-CHANNEL AMPLIFIER
Ultra-compact, high density aluminum alloy chassis provides superior thermal stabilityFour layer, glass epoxy circuit board for enhanced performance and reliabilityFull Range Class D amplifier technology Bridgeable for high power operation (CH1+CH2/CH3+CH4)Balanced differential inputs for superior noise rejectionInput sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level inputInput selector switch (2 CH / 4 CH)Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC) Fully variable, 12dB per octave, electronic crossoversBuilt-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controllerIlluminated logo
Diamond Audio MO75t Horns Are the Best Sounding Horns out There.
We know because we had the opportunity to evaluate these horns with Diamond's staff during the design phase. We auditioned all of the popular horns on the market alongside these and nothing else compares. The dual stage horn flare, inverted neo magnet/diaphragm, and much more refined phase plug design outperforms other bullet style horns by leaps and bounds.
Diamond Audio MSPRO65 Mid Woofers Are the Way to Go.
These woofers have a lot in common with other pro audio type woofers out there but they have a few tricks up their sleeve that is easy to miss if you don't know what you are looking at. They cone shape has a convex geometry that dramatically improves cone stiffness, efficiency (loudness per watt), and amplifies/smooths the high frequency response. Couple all of that with a 400 watt thermal spec and you get a wall of volume that simply sounds better than everything else out there.
12db Crossovers Add a Lot to Performance and Reliability
Most all horns on the market come with 6db caps for crossovers. Those type of crossovers have a lot of problems though. The sound of a horn using just a cap changes dramatically with volume, making it impossible to tune your system to sound equally as good at high volume as lower volumes. The crossovers included in this kit though are 12db crossovers with a much higher power handling and a much more stable output at all volume levels.
Installation Notes: The factory fairing speaker pods must be modified slightly using a heat gun in order to make clearance for the woofer magnet inside the pod. This is a very simple procedure. Heat the pod where the magnet makes contact until the plastic is soft and then simply screw the speaker in place.
Specifications - Woofers
Power Rating: 200 W RMS/ 400 MAX
Sensitivity: 97dB 1W/1M
Frequency Response: 110Hz-10k Hz+/-3dB
Nominal Impedance: 4 ohm
Mounting Depth: 2.375"
Cut-out Diameter: 5.625"
Over-all Diameter: 6.5"
Over-all Height: 2.5625"
Specifications - Compression Horn Tweeters
Overall Diameter 2.28"
Cut Out Diameter 1.61"
Over All Depth 2.0"
Mounting Depth 1.12"
Sensitivity 106 db 1W/1M
Frequency Response 2k - 20k
Nominal Impedance 4 Ohm
50W RMS / 100W Max
This item IS IN STOCK