THIS 3 ITEM PACKAGE SHIPS WITH THE
- AGGRESSOR PRO 80 PAIR +
- HERTZ SPL SHOW SV200L
- HERTZ HCP 4D AMP
>>> NO WAIT TIME - THIS ITEM IS IN STOCK NOW <<<
AGGRESSOR PRO 80 PAIR
Works with factory or aftermarket stretched bags
Harley Davidson Road Glide, Street Glide, Electra Glide, Road King, Ultra, & CVO Models. Will not work with CVO saddlebag amplifiers. Will work with CVO if you remove the saddlebag mounted amplifiers.
Works with factory or aftermarket stretched bags.
Our most popular Aggressor Woofer kit is the Pro 80.
The Pro 80 comes as a pair (left and right) only. The kit includes everything that you will need to properly mount two pro audio 8" woofers (1 each bag) and also reinforce your saddlebags for higher output.
Speakers are not included. '98 - Current Road Glide, Street Glide, Electra Glide, Road King. Factory and aftermarket bags. Standard or stretched bags. Works well with lid speakers.
- Two 8" Woofer Mounts (left & Right)
- CNC Machined HDPE Construction
- Router Templates Included
- All American Made Stainless Hardware
- 2 Powder Coated Steel Grills Included
- 100% Waterproof
- Leaves Most of the Bag Available for Storage
This kit is designed for both the professional and the DIY'er alike.
- Everything that you will need for a great result is included in the kit. The kit takes all of the guess work out of installing big loud speakers in your saddlebags.
- This kit is designed for pro audio and marine audio full range type speakers and not car audio subwoofers. The speaker bolt pattern is common to most all pro audio and marine 8" woofers.
- Some subwoofers may fit but experiment at your own risk.
- Special spacer rings are available for specific marine audio 8" woofers such as the Diamond Audio HXM8. These spacers allow for the tweeter bridge to clear and for the woofer to properly
- seal up to the Aggressor mount
HERTZ SPL SHOW SV200L WOOFER(S)
Designed to offer superior performance
The Hertz SV 200L car audio woofers was designed to offer superior performance in terms of both thermal and mechanical capability.
The target has been fully hit since the woofer features a pure copper voice coil wound on KSV former, an oversized magnet and a vented bottom plate.
The SV 200L employs the proprietary V-cone technology with the cone constructed from pulp with cotton fibre as well as Lossless Polymer Rubber Surround, offering a powerful low frequency response as well as the best off-axis dispersion.
- Size mm (in.) 200 (8)
- Power Handling - Peak W 500
- Power Handling - Continuous W 250
- Impedance Ω 4
- Frequency response Hz 45 ÷ 4,5k
- Sensitivity dB SPL 94,5
- Voice coil Ø mm (in.) 50 (2)
- Magnet High density flux ferrite
- Cone/Dome Ultra light, non pressed paper
HERTZ HCP 4D AMP
D Class car audio amplifier
HCP 4D is a D Class car audio amplifier, able to offer up to 1160W (RMS); it is the ideal choice for those who want high power levels in complex systems. Extremely versatile, complete in its functions, provided with Speaker-In and RCA-In inputs to work with any head units, it has been designed to work also in mono (selectable mode), for a three-channel system with sub and front, or a powerful two-channels system.
All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier
Channel mode 4 - 3 - 2
- 4 Ch: 85 W x 4 (4 Ω)
- 4 Ch: 145 W x 4 (2 Ω)
- 3 Ch: 85 W x 2 (4 Ω) + 290 W x 1 (4 Ω)
- 3 Ch: 145 W x 2 (2 Ω) + 290 W x 1 (4 Ω)
Output Power (RMS) @ 14.4 VDC
- 2 Ch: 290 W x 2 (4 Ω) RECOMMENDED FOR THIS HARLEY KIT
- Bypass: Yes
- Hi-Pass: A/B: 50 ÷ 3.2k Hz @ 12 dB/Oct.
- Lo-Pass: A/B: 50 ÷ 3.2k Hz @ 12 dB/Oct.
- Band-Pass: -
Distortion - THD
- (100Hz @ 4Ω) 0.02%
- (A weighted @ 1V) 100 dB
- (100Hz @ 4Ω) 200
Size W x D x H
- mm (in.) 215 x 190 x 50 (8.46 x 7.48 x 1.97)