THIS 6 ITEM PACKAGE SHIPS WITH THE 
ROAD GLIDE PRO FAIRING KIT +
DIAMOND AUDIO MSPRO65 SPEAKERS +
DIAMOND AUDIO MO75T SHALLOW MOUNT HORNS
CROSSOVERS
CERWIN-VEGA B52 AMP
SPEAKER ADAPTERS
----------------------------------------
FAIRING KIT
LOUDEST SPEAKER COMBINATION POSSIBLE
GENERAL FEATURES:
The Kit you have all been waiting for is finally here! Now your 98' to 13' Road Glide can take on this New innovative design that achieves the best DIAMOND AUDIO MSPRO65 6.5" Mid speaker with the DIAMOND AUDIO MO75T Shallow Mount Horn. Includes new Metal Grill.
Loudest Speaker Combination Possible
If you want the Loudest set up in the bike world then here it is. Exclusive through 702 Motoring Las Vegas. This was made after years of requests and systems just demanding more!
Bolt In
No modifications to the bike required. This kit bolts up to the factory holes and retains the factory grill.   
 
CVO & Screamin' Eagle Fitment Note: CVO and Screamin' Eagle Road Glide models equipped with 5x7" factory speakers in the fairing will need a new speaker grill/speaker mounting assembly from Harley in order to make this part fit.
----------------------------------------
DIAMOND AUDIO MSPRO65 SPEAKERS
SHigh Output Midrange
GENERAL FEATURES:
The MSPRO65 High Output Midrange can be employed to build systems with tremendous impact.  The  MSPRO65 features a solid, robust structure and, like all the other Diamond Audio components, it employs SHORTING RING UTILIZED IN MOTOR STRUCTURE FOR FAR-FIELD PERFORMANCE, for unheard-of thermal and mechanical capability also in extreme circumstances. MANUFACTURED TO IP65 MARINE GRADE COMPLIANT SPECIFICATIONS both robust and light weight, THERMAL MOULDED WATERPROOF PAPER CONE to ensure linearity even under extreme conditions, contributing to high SPL scores.
----------------------------------------
CERWIN-VEGA STEALTH BOMBER SERIES B52
2-Channel 1000W Mini Digital Amplifier w/ Bass Control Knob
GENERAL FEATURES:
RMS Power Rating 2ohm: 250×2 RMS
Power Rating 4ohm: 200×2
Mono: (Bridged 4ohm): 500×1
MAX Power: 1000W RMS
THD: 0.5%
Frequency Response: 10Hz – 35kHz
Signal to Noise Ratio: >85dB
Dampening Factor: >250
Channel Separation: >55dB
Overall Efficiency: >88%
Input Sensitivity: 0.2V – 10.0V
Dimensions: 7.7” x 4.0” x 1.4”
Features
UCHD aluminum alloy chassis
Full Range Class D IR Chipset
DirectFET Power Mosfet Output Stage
SMD Technology on 4 layer Glass PC Board
ICAD circuit provides superior overload protection
Frequency response 10Hz – 35kHz
Variable 12dB crossover
Bridgeable
BTR Port Optional Upgrade To Bluetooth Receivers
Remote Bass Level control
Premium 8 gauge power connections
Multi channels / Mono channel
----------------------------------------
DIAMOND AUDIO MO75T HORNS
The Best Sounding Horns out There.
GENERAL FEATURES:
1" HIGH OUTPUT SHALLOW TWEETERS
POWER RATING: 100W RMS
SENSITIVITY 105dB 1W/1M
FREQUENCY RESPONSE 2.5k-20k Hz
NOMINAL IMPEDANCE 4 Ohm
MOUNTING DEPTH 1.39"
CUT-OUT DIAMETER 2.09"
OVERALL DIAMETER 2.95"
OVERALL HEIGHT 1.57"
----------------------------------------
12db CROSSOVERS
Add a Lot to Performance and Reliability
GENERAL FEATURES:
Most all horns on the market come with 6db caps for crossovers. Those type of crossovers have a lot of problems though. The sound of a horn using just a cap changes dramatically with volume, making it impossible to tune your system to sound equally as good at high volume as lower volumes. The crossovers included in this kit though are 12db crossovers with a much higher power handling and a much more stable output at all volume levels. 
----------------------------------------
INSTALLATION NOTE: Some applications, such as the 15-UP Road Glide, require slight modification to the factory speaker enclosure to allow the magnet of the MSPRO65 speaker to fit. 
One common way known to do this is to use a heat source such as a propaine torch and heat up the enclosure in the area of the magnet and allow it to form as the speaker is pushed into place, although this method is sucessful 702 Motoring Las Vegas does not recommend this approach.
Our Possition is this - 
You are spending good money on purchasing High End Products to have your Bike Sounding the "BEST" NOT second best.
If using the heat up method you are using excessive pressure on the basket and speaker assembly to force the magnet of the speaker to form the enclosure, during this process unecessary stress can and probably will distort the speaker and negatively effect the voice coil that has been Precission assembled.
When this occurs you have a Speaker that is not Happy, for example imagine getting into a small car, a car you barley fit into, you may fit, but you are not going to be happy, you are restricted, you may have trouble breathing, this is NOT how you want your Speaker to Feel, you want that Speaker Happy so it Creats a Level of Sound that puts a smile on your face every time you turn your system on and this is what Diamond Audio is Famous for.
Furthermore when using the heat method the moulded enclosure hardens against the magnet and will produce constant pressure on that magnet, the speaker will not sound as good as it could and can cause a unstable and now miss aligned voice coil to prematurely fail, more than likely right in the middle of a weekend cruise.
at 702 Motoring Las Vegas we share these small details with our customers, lessons we have learned that helps you get the most out of your system.
When you ride with Diamond Audio & 702 Motoring you are riding with a Sound Level others will Envy - When you are Happy you will share your buying experiance with others and we appreciate that, nothing makes us happier than when we receive a phone call from a New Customer that you refered to us because they can not believe how good your bike sounded.
Provided are detailed pictures of completed modifications to the Road Glide enclosures, simply put a little strip of sound deadening material over the open hole and you are done.
Lastly, 
Many Harley's have a screw head size that is large, if your Harley has this type of screw we recomend NOT using them and pick up some small round head style screws as shown in picture one.
Reason being is the large head screw is just that two large, using them will tear and rip the speakers surround, again we want a Happy Speaker, the smaller head screw fits perfectly in the mounting hole of the speaker not effecting the surround, the speaker fits Perfectly !!! Will Sound Awesome & You will be Smiling !!