HARLEY ROAD GLIDE SPEAKER / AMP KIT
GENERAL FEATURES:
Full Extreme Level Harley Davidson Road Glide Stereo System Upgrade.
This kit comes loaded with the main parts you need to upgrade your '15 & up Road Glide. This is absolute top level gear.
Extreme Output & the Best Sound Quality
Loud Harley Davidson Road Glide Speakers
Step into the top level of pro audio Road Glide speakers. This kit includes everything, Diamond Audio MO75T horns and MSPRO65 mid woofers to your '15 & up Road Glide. This is a whole new level of loud that simply has not been possible up until now.
Easy Installation Harley Speakers
We include several parts in this kit that make installation a snap. Included is a quick disconnect harnesses for each of the horns and crossovers. The included speaker grills snap right in place of the original factory grills. Each horn comes with a CNC machined HDPE back plate. All fasteners are stainless steel. The woofers are plug & play with the factory Harley speaker wiring.
IP65 Marine Grade Speakers
Waterproof Harley Davidson Road Glide Speakers
These speakers are designed to take all of the weather that you can throw at them. They are treated for extreme UV exposure, extreme swings in temperature, high vibration, and water.
Included in This Kit
600 Watt Diamond Audio MICRO2V2 2 channel amplifier
6.5" Diamond Audio MSPRO65 pro audio woofers
Dual stage Diamond Audio MO75T compression horn tweeters
Stamped steel, powder coated Road Glide speaker grills with horn provisions
Stainless steel mounting hardware (see Installation Note to the right)
Neoprene speaker gasket
CNC machined HDPE horn mounting rings
Pre-wired OFC tweeter extensions with serviceable quick disconnects
The Magic Compression HornsADDITIONAL ITEMS MAY BE NECESSARY FOR INSTALLATION (SEE ADITIONAL ITEMS TO THE RIGHT)
-------------------
DIAMOND AUDIO MICRO2V2
2-Channel Amplifier - 500W RMSGENERAL FEATURES:
500W Compact Full-Range Class-D 2-Channel Amplifier
RMS Power Rating:
2 Ohm: 250 Watts x 2 Channel
4 Ohm: 150 Watts x 2 Channel
4 Ohm Bridged: 500 Watts x 1 Channel
Signal to Noise Ratio: 85 dB
THD: 0.5%
Dimensions: 7.89" (200.5 mm) L x 4" (103 mm) W x 1.46" (37.2 mm) HUltra-Compact, High Density Aluminum Alloy Chassis Provides Superior Thermal Stability
Four Layer, Glass Epoxy Circui Board For Enhanced Performance & Reliability
Full-Range Class D Amplifier Technology
Balanced Differential Inputs For Superior Noise Rejection
Input Sensitivity From 200 mV - 10 V accepts Line (RCA) & Speaker Level Input
Selectable Auto-Turn-On Modes: Signal Sensing (VOX), 12 V Remote (REM) & DC Offset (DC)
Fully Variable, 12 dB Per Octave, Electronic Crossover
Variable 18 dB Per Octave Sub-Sonic Filter
Adjustable Bass EQ (45 Hz: 0 dB - +12 dB)/ Remote Level Control Included
Illuminated Logo-------------------
Diamond Audio MO75t Horns Are the Best Sounding Horns out There.GENERAL FEATURES:
We know because we had the opportunity to evaluate these horns with Diamond's staff during the design phase. We auditioned all of the popular horns on the market alongside these and nothing else compares. The dual stage horn flare, inverted neo magnet/diaphragm, and much more refined phase plug design outperforms other bullet style horns by leaps and bounds.
Diamond Audio MSPRO65 Mid Woofers Are the Way to Go.
These woofers have a lot in common with other pro audio type woofers out there but they have a few tricks up their sleeve that is easy to miss if you don't know what you are looking at. They cone shape has a convex geometry that dramatically improves cone stiffness, efficiency (loudness per watt), and amplifies/smooths the high frequency response. Couple all of that with a 400 watt thermal spec and you get a wall of volume that simply sounds better than everything else out there.
-------------------
12db Crossovers Add a Lot to Performance and Reliability
Most all horns on the market come with 6db caps for crossovers. Those type of crossovers have a lot of problems though. The sound of a horn using just a cap changes dramatically with volume, making it impossible to tune your system to sound equally as good at high volume as lower volumes. The crossovers included in this kit though are 12db crossovers with a much higher power handling and a much more stable output at all volume levels.
Specifications - Woofers
Power Rating: 200 W RMS/ 400 MAX
Sensitivity: 97dB 1W/1M
Frequency Response: 110Hz-10k Hz+/-3dB
Nominal Impedance: 4 ohm
Mounting Depth: 2.375"
Cut-out Diameter: 5.625"
Over-all Diameter: 6.5"
Over-all Height: 2.5625"
Specifications - Compression Horn Tweeters
Overall Diameter 2.28"
Cut Out Diameter 1.61"
Over All Depth 2.0"
Mounting Depth 1.12"
Sensitivity 106 db 1W/1M
Frequency Response 2k - 20k
Nominal Impedance 4 Ohm
Power Handling
50W RMS / 100W Max
Included Crossover
12db
Rebuildable Diaphragm
Yes
This item IS IN STOCK
2015 23 HARLEY ROAD GLIDE DIAMOND AUDIO PRO SPEAKER MICRO2V2 MSPRO65 MO75T HORNS
Some applications, such as the 15-UP Road Glide, require slight modification to the factory speaker enclosure to allow the magnet of the MSPRO65 speaker to fit.
One common way known to do this is to use a heat source such as a propane torch and heat up the enclosure in the area of the magnet and allow it to form as the speaker is pushed into place, although this method is successful 702 Motoring Las Vegas does not recommend this approach.
Our Position is this -
You are spending good money on purchasing High End Products to have your Bike Sounding the "BEST" NOT second best.
If using the heat up method you are using excessive pressure on the basket and speaker assembly to force the magnet of the speaker to form the enclosure, during this process unnecessary stress can and probably will distort the speaker and negatively effect the voice coil that has been Precision assembled.
When this occurs you have a Speaker that is not Happy. For example imagine getting into a small car, a car you barley fit into. You may fit, but you are not going to be happy. You are restricted, you may have trouble breathing, this is NOT how you want your Speaker to Feel. You want that Speaker Happy so it Creates a Level of Sound that puts a smile on your face every time you turn your system on and this is what Diamond Audio is Famous for.
Furthermore when using the heat method the moulded enclosure hardens against the magnet and will produce constant pressure on that magnet, the speaker will not sound as good as it could and can cause a unstable and now miss aligned voice coil to prematurely fail, more than likely right in the middle of a weekend cruise.
At 702 Motoring Las Vegas we share these small details with our customers, lessons we have learned that helps you get the most out of your system.
When you ride with Diamond Audio & 702 Motoring you are riding with a Sound Level others will Envy - When you are Happy you will share your buying experience with others and we appreciate that, nothing makes us happier than when we receive a phone call from a New Customer that you referred to us because they can not believe how good your bike sounded.
Provided are detailed pictures of completed modifications to the '15-UP Road Glide enclosures. Cut away a small portion of the enclosures to allow the magnet the room it needs, then screw the speaker into place. Next, simply put a little strip of sound deadening material over the open hole and you are done. For sound deadening material (CLICK HERE).
Lastly,
Many Harley's have a screw head size that is large, if your Harley has this type of screw we recommend NOT using them and pick up some small round head style screws as shown in the last picture. For appropriate screws (CLICK HERE).Reason being that the large head screw is just that – too large. Using them will tear and rip the speakers surround. Again we want a Happy Speaker, the smaller head screw fits perfectly in the mounting hole of the speaker not effecting the surround. The speaker fits Perfectly!!! It Will Sound Awesome & You will be Smiling!!
IF YOU HAVE A FACTORY RADIO YOU WILL NEED THE ADDITIONAL PLUG & PLAY T-HARNESS ITEM # 234201551683 (CLICK HERE)
IF YOU HAVE A FACTORY RADIO YOU WILL NEED THE ADDITIONAL PLUG & PLAY RADIO TO AMP ITEM # 193702268124 (CLICK HERE)
AMPLIFIER MOUNTING BRACKET ITEM # 192891435822 CLICK HERE)
SMALL ROUND HEAD STYLE SCREWS ITEM # 224735405135 (CLICK HERE)
SOUND DEADENING MATERIAL 10X12" SHEET ITEM # 324934012568 (CLICK HERE)